Intric GEO 12 Grout Plant | For Rent or Sale

The Intric GEO 12 geothermal grout plant is engineered to deliver precise, thermally conductive borehole grouting for high‑efficiency ground‑source heat pump systems.

Close-up of the Intric GEO-12 grout plant control panel showing the digital display, toggle buttons, emergency stop switch, and Intric Grouting Solutions branding on the stainless steel enclosure.
Close-up of the Intric GEO-12 automated grout plant control panel, showing the color touchscreen display, push-button controls, and emergency stop on the stainless steel enclosure branded Intric Grouting Solutions.
Engine and power compartment of the Intric GEO-12 grout plant with the side access door open, showing the diesel engine, hydraulic reservoir, filters, batteries, and service points mounted on the skid frame.
Close-up of the Intric GEO-12 grout plant’s stainless steel plumbing between twin mixing tanks, showing heavy-duty ball valves, elbows, and support brackets for directing grout flow.
Side view of the Intric GEO-12 grout plant showing a stainless steel mixing tank cradled in a heavy-duty support saddle, with nearby plumbing valves and the adjacent control enclosure on the skid base.
Close-up of the Intric GEO-12 grout plant’s aggregate hopper and water meter area, showing manual control levers, flexible hose connection, and a vertical sight gauge marked in liters and gallons.
Top view of the Intric GEO-12 grout plant’s stainless steel mixing hopper, showing safety grating over the opening, internal baffles, and nearby fittings and hoses for grout feed and mixing.
Rear view of the Intric GEO-12 skid-mounted grout plant, showing the stainless steel hopper with Intric branding, exposed hydraulic components and hoses, and robust steel frame sitting on a snowy jobsite.
Close-up of the Intric GEO-12 grout plant’s hydraulic power section, showing twin cylinders, high-pressure hoses, and fittings mounted on a rigid skid frame in front of the stainless mixing tank.
Side view of the Intric GEO-12 grout plant’s upper hopper with Intric logo, showing the stainless steel enclosure and the network of hydraulic hoses and cylinders mounted below the frame.
Engine and power compartment of the Intric GEO-12 grout plant with the side access door open, showing the diesel engine, hydraulic reservoir, filters, batteries, and service points mounted on the skid frame.

GEO 12 Grout Plant Specs and Typical Jobs

GEO 12 Grout Plant Specs

  • Frame: Skid‑mounted steel frame, partially enclosed with forklift slots and powder‑coat finish.
  • Water dosing system: Dual 60-gal water holding and dosing tanks (2 × 60 gal) with flushing connection.
  • Mixing tank: Two‑piece mixing system with round tank, access door, and 80 gal mixing capacity.
  • Tools in mixing tank: Specially designed paddle and baffles to develop a smooth and consistent grout mixture.
  • Grout pump performance: Single hydraulic‑driven, double‑acting piston pump, up to 60 gal/min at 1800 psi (120 bar).
  • Digital monitoring: Internal digital screen displays flow and pressure, with total volume calculated by stroke counting.

Typical GEO 12 Geothermal Jobs

  • Vertical closed‑loop geothermal borehole grouting for residential and commercial ground‑source heat pump systems.
  • Large multi‑bore geothermal fields on schools, campuses, and institutional buildings needing continuous, high‑output grout placement.
  • Retrofit and high‑performance geothermal projects where low water‑to‑cement, thermally enhanced grout is required to maximize loop efficiency.
VIEW SPEC SHEET

Intric GEO 12 overview

The Intric GEO 12 is a skid‑mounted geothermal grout plant designed for mixing and pumping thermally conductive grout into vertical boreholes on ground‑source heat pump projects. It operates as a stand‑alone unit with its own power, mixing, and pumping systems, so it can be mobilized to a geothermal jobsite and put straight to work with a wide range of drill fleets.

Why rent the Intric GEO 12 from NPP

National Piling Products offers the GEO 12 for both rental and sale as part of its geothermal grouting lineup, supporting contractors with equipment, materials, and application expertise for closed‑loop geothermal work. Because it is available in the rental fleet as well as for purchase, the GEO 12 is supplied configured for practical geothermal production and supported by a team experienced in setting appropriate operating parameters for different loop lengths and ground conditions.

A stand‑alone plant for any drill fleet

The GEO 12 is an independent geothermal grouting platform, not tied to any specific drill rig or manufacturer. It can work alongside existing geothermal drills from various brands, allowing contractors to move the unit between jobs, pair it with multiple rigs on the same site, and maintain grout production even as drilling equipment rotates.

Top‑notch mechanic shop and support

National Piling Products backs the GEO 12 with a mechanic and service group experienced in specialty grouting and drilling equipment, including Intric GEO‑series plants. This team maintains the rental fleet, troubleshoots pumps, hydraulics, and controls, and supports field crews through startup, production, and demobilization on demanding geothermal projects.

Connect with NPP

Contractors can connect with National Piling Products through its online resources for support content, GEO‑series walk‑throughs, and equipment overviews. For GEO 12 rentals, sales, or application support on vertical closed‑loop geothermal projects, they can call the NPP office to speak directly with the team.

Related Equipment