Meet the Intric D12 | “Grout Like a Pro”
If you’ve ever tried to push a small grout plant way past what it was built for, you already know why the Intric D12 exists. It’s the machine you bring in when the piles are bigger, the schedule is tighter, and you don’t want to stand around waiting on grout.
At National Piling Products, we like the D12 because it hits that sweet spot: big‑job capability without being a monster to move, set up, or run.
Why Contractors Like the D12
The D12 is built for crews who actually work their equipment, not just park it in pretty fleet photos. It’s designed to mix fast, pump hard, and keep things simple enough that your guys aren’t fighting controls all day.
A few big picture highlights:
- High‑shear colloidal mixing for clean, consistent grout
- Enough flow and pressure to handle larger micropiles and heavy grouting work
- Smart layout with a detachable power pack and digital readout so your operator actually knows what’s going on
- Compact, skid‑mounted footprint that still fits on a typical jobsite and flatbed
Think of it as the “we’re done messing around with undersized gear” grout plant.
Intric D12 Key Specs (At a Glance)
Use these as bullet specs on the page:
- 60 gal high‑shear colloidal mixing tank
- Approx. 150–170 gal holding/storage tank capacity
- Up to about 60 GPM grout output (flow)
- Up to about 1800 PSI grout pressure (not at the same time as max flow)
- Single hydraulic‑driven, double‑acting piston grout pump
- Three‑cylinder Kubota diesel engine, Tier 4 Final, around 49.5 HP
- Skid‑mounted steel frame with forklift pockets and powder‑coat finish
- Digital screen to monitor pressure and theoretical volume via stroke count
- Integrated toolbox and work lights for real‑world job use
You get serious throughput, but still in a package that’s manageable for a typical micropile or ground‑improvement crew.
Where the D12 Really Shines (Job Types)
If your work lives in any of these lanes, the D12 is right at home:
- Micropiles for buildings, bridges, and industrial foundations
- Tiebacks and anchors where you need steady, reliable grout delivery
- Soil nails and retaining wall work on DOT, commercial, or hillside projects
- Ground improvement and permeation grouting where flow control matters
- Geothermal and energy projects that need repeatable batches and consistent mix
- Tunnel, shaft, and confined‑space projects where a detachable power pack is a big plus
In short: if it involves cementitious grout, steel in the ground, and a schedule you actually care about, the D12 is worth a serious look.
Real‑World Benefits for Your Crew
Here’s what your superintendent and operators actually feel in the field:
- Faster mixing, less babysitting
High‑shear colloidal mixing means you don’t spend all day chasing lumps and inconsistent batches. The D12 is built to get grout up to speed quickly so you can get back to drilling and placing.
- Enough power to stop “starving the rig”
With up to about 60 GPM and 1800 PSI available, you’re not constantly at the edge of what the plant can deliver. That extra headroom is what keeps production rigs moving instead of waiting on grout.
- Easier setup and daily routine
Skid frame, forklift slots, simple controls, and clear digital feedback take a lot of friction out of the day. Your crew learns it fast and gets comfortable with it quickly.
- Flexible materials
Designed to handle cement grout with the ability to incorporate additives like sand, silica, or lime when the mix design calls for it. You’re not locked into one “vanilla” mix.
Why Get Your D12 from National Piling Products?
You’re not just buying a grout plant; you’re buying support from people who live in the same deep foundation world you do.
When you work with National Piling Products:
- You get a team that understands micropiles, anchors, soil nails, and grouting—not just generic equipment.
- We can help match grout plants to your drill rigs, hollow bar, and project requirements instead of selling you something that’s “close enough.”
- We support you on the front end with specs and real‑world feedback, and we stay available when you have questions from the field.
If you already run Intric plants, we can also talk through fleet standardization, spare parts strategies, and how the D12 pairs with your other equipment.
Rental or Purchase Through NPPI
National Piling Products supports these job types every day with a fleet of Intric grout plants, specialty drill rigs, and field-experienced staff. That means whether you are bidding micropiles, soil nails, or compaction grouting, NPPI can match D-12 rental or sale units to your specific scope—and help you size the plant, so the grout keeps up with your drill instead of the other way around.
Next Steps
Are you a contractor working on micro-piles, helical anchors, soil nails, ground anchors, or other deep foundation projects? With NPP, you can rent or purchase the Intric D12 Grout Plant directly from National Piling Products, with full customer service, parts support, and access to industry-leading micro drilling equipment, including:
At NPP, we take pride in delivering top-tier customer service, and we invite you to explore our YouTube tutorials designed to support you in the field so your projects run more efficiently and profitably.To discuss availability, pricing, and how the D9 fits into your upcoming work, call National Piling Products at 855‑801‑7453.
We are your “Deep Foundation Equipment Specialists.”
